• Author : Zhiming Zhuang

 
 

Transceiver tuning CLI commands 

Description This feature provides the capability to configure transceiver SERDES electrical tuning parameters. The ability to change the tuning of equalization, amplitude, emphasis from the EOS CLI command may help to improve or fix marginal links due to variability in transceiver modules. Platform compatibility This feature is platform independent. Configuration Transceiver tuning is configured under the primary interface configuration mode only. The primary interface is the first or only interface of a given multi-lane port. Syntax The following command can configure one or multiple electrical tuning parameters on one or multiple lanes. transceiver electrical lane <lane(s)> <[rx-output-amplitude <value>] [tx-input-equalization <value>]...
Continue reading →

Transceiver tuning CLI commands

Description This feature provides the capability to configure transceiver SERDES electrical tuning parameters. The ability to change the tuning of equalization, amplitude, emphasis from the EOS CLI command may help to improve or fix marginal links due to variability in transceiver modules. Platform compatibility This feature is platform independent. Configuration Transceiver tuning is configured under the primary interface configuration mode only. The primary interface is the first or only interface of a given multi-lane port. Syntax The following command can configure one or multiple electrical tuning parameters on one or multiple lanes. transceiver electrical lane <lane(s)> <[rx-output-amplitude <value>] [tx-input-equalization <value>]...
Continue reading →

Xcvr tuning CLI commands

This feature provides the capability to configure transceiver SERDES electrical tuning parameters. The ability to change the tuning of equalization, amplitude, emphasis from the EOS CLI command may help to improve or fix marginal links due to variability in modules. Platform compatibility This feature is platform independent. Configuration Transceiver tuning is configured under the primary interface configuration mode only. The primary interface is the first or only interface of a given multi-lane port. transceiver electrical lane <lane(s)> <[rx-output-amplitude <value>] [tx-input-equalization <value>] [rx-output-pre-emphasis <value>]> The following commands can fully or partially remove the configured electrical tuning. no|default transceiver electrical no|default transceiver...
Continue reading →

Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: