• Author : Jonathan Doyle

 
 

Configurable counter period

By default, counters are polled from hardware every 2 seconds. This enhancement allows this period to be configured, allowing for more or less frequent polling of the hardware counters. Decreasing this period will result in counter values being available for consumption more quickly, while increasing it will result in reduced CPU usage. Platform compatibility DCS-7010 DCS-7020R DCS-7050X DCS-7050X2 DCS-7060X4 DCS-7280 DCS-7300 DCS-7368X4 DCS-7500 Notes: Feature support on DCS-7060X4 and DCS-7368X4 available since EOS-4.24.0F. Configuration Configuration can be done using update interval from within the monitor ethernet counters mode. This mode can be entered from configure mode via monitor counters mode....
Continue reading →

Configurable counter period

By default, counters are polled from hardware every 2 seconds. This enhancement allows this period to be configured, allowing for more or less frequent polling of the hardware counters. Decreasing this period will result in counter values being available for consumption more quickly, while increasing it will result in reduced CPU usage. Platform compatibility DCS-7010 DCS-7020 DCS-7050X DCS-7050X2 DCS-7280 DCS-7300 DCS-7500 Configuration Configuration can be done using update interval from within the monitor ethernet counters mode. This mode can be entered from configure mode via monitor counters mode. Entering monitor ethernet counters mode Arista(config)#monitor counters Arista(config-mon-counters)#ethernet interfaces Configuring counter period Arista(config-mon-counters-ethintfs)#update interval 0.5...
Continue reading →

Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: