• Author : Sam Ho


Advanced Mirroring Features

Filtered Mirroring Current Behavior Overview Filtered Mirroring allows certain packets to be selected for mirroring, rather than all packets ingressing or egressing a particular port. Platform Compatibility DCS-7010T DCS-7050X DCS-7060X DCS-7250X DCS-7260X DCS-7300X DCS-7280E DCS-7500E DCS-7280R DCS-7280R2 DCS-7500R DCS-7500R2 DCS-7020 DCS-7280R3 DCS-7500R3 Configuration Note: To use this feature on the DCS-7280SE, DCS-7500E, DCS-7280R, DCS-7280R2, DCS-7500R and DCS-7500R2 series, a platform configuration may be required to enable the mirroring ACL profile. See the platform-specific section for instructions. Filtered mirroring is configured by creating an IPv4, IPv6 or MAC access-list and then attaching it to a monitor session. For example: Arista(config)#ip access-list...
Continue reading →

Mirroring to Multiple Destinations

Description This feature adds support for allowing multiple destinations in a single monitor session on platforms listed below. Reference TOI for support of advanced mirroring features is available here. Platform compatibility DCS-7280SE, DCS-7500E, DCS-7280R, DCS-7280R2, DCS-7500R, and DCS-7500R2 Configuration The following section describes how to configure a monitor session with multiple destinations. lf121(config)#monitor session s1 source ethernet 7 lf121(config)#monitor session s1 destination ethernet 23,24,25 lf121(config)#show monitor session Session s1 ------------------------ Source Ports: Both: Et7 Destination Ports: Et23 : active Et24 : active Et25 : active lf121(config)#monitor session s1 destination ethernet 26 lf121(config)#monitor session s1 destination port-Channel 1 lf121(config)#monitor session s1...
Continue reading →


Get every new post on this blog delivered to your Inbox.

Join other followers: