• Author : Sameer Shah Shah


Static NAT and twice NAT counters

Packet counters for Static and Twice NAT¬†connections are now supported on the DCS-7150 series. This is a debug feature. Enable this feature to start counting packets translated by Static NAT rules in hardware. This can be used to troubleshoot Static NAT translation failures. Configuration The CLI command “ip nat translation counters” can be used to enable this feature globally.¬†“no ip nat translation counters” will disable the feature. Once enabled, all rules currently programmed in hardware and new rules configured after this command will get policers for counting packets. Status Show Commands The CLI commands “show ip nat translation hardware detail”...
Continue reading →


Get every new post on this blog delivered to your Inbox.

Join other followers: