Posted on January 31, 2019 6:35 pm
 |  Asked by Dave Peters
 |  228 views
Tags:
0
0
Print Friendly, PDF & Email

Hi all,

Just checking this version out on the above unit, and all interfaces stop being recognized. Anyone know if 4.21.1.1F is a no-go on the DCS-7280SR?

Thanks.

0
Posted by Aesha Parikh
Answered on January 31, 2019 6:45 pm

Hi Dave,

4.21.1.1F is a supported EOS code for DCS-7280SR. You can verify RN of the release to check supported hardware. Check if the image was not corrupted on download. Here is the md5 checksum.
ad849bf926b01152df90d60777ee8c54 EOS-4.21.1.1F.swi

On the switch run: verify /md5 flash:EoS-4.21.1.1F to compare.

Thanks,
Aesha

0
Posted by Florian Hibler
Answered on January 31, 2019 7:23 pm

Hi Dave,

the DCS-7280SR-48C6 is supported in 4.21.1.F. After the reboot it can take several minutes until the ASIC is initialized, so you might not be able to see a full ‘show inventory’ or ‘show interfaces status’ right away.

Best regards,
Florian

Post your Answer

You must be logged in to post an answer.