Posted on February 15, 2017 1:43 am
 |  Asked by Robert Bytheway
 |  5187 views
RESOLVED
0
0
Print Friendly, PDF & Email

I have a need to send arista switch syslog info to at least 2 different syslog servers.  Is this possible?  I have not been able to find anything definitive in any online documentation.

 

thanks,

0
Posted by Brandon
Answered on February 14, 2017 10:48 pm

Hi Robert,

Yes, it is possible to specify multiple (different) syslog servers in the configuration in EOS.

Thanks,

Brandon

Marked as spam

is there any special syntax?

(Robert Bytheway at February 15, 2017 4:19 pm)
2
Posted by Upasana Dangi
Answered on February 15, 2017 2:00 am

Hi Robert,

Indeed you should be able to configure multiple syslog servers on the device. The following link is a good reference for configuring the same:

https://eos.arista.com/introduction-to-managing-eos-devices-setting-up-management/#131_Configuring_System_Logging

0
Posted by Tamas Plugor
Answered on February 15, 2017 12:22 pm

Hi Robert,

You can use the ‘logging host <server IP or hostname> <port> <protocol>’ command from global config mode and the running config can contain multiple logging host statements as specified in our online config guide

https://www.arista.com/en/um-eos-4172f/eos-section-3-10-command-line-interface-commands#ww1148956

Thanks,
Tamas

Post your Answer

You must be logged in to post an answer.