Posted on July 16, 2020 3:10 am
 |  Asked by Richard Loo
 |  94 views
1
1
Print Friendly, PDF & Email

Hello, I am testing EVPN and MPLS VPN feature of vEOS(4.24.1.1F) in EVE-NG.

I created two networks, one is EVPN, the other one is MPLS VPN network.

I would like to know if the border leaf in EVPN network could be configured as PE router in MPLS network. Basically I would like to combine border leaf and PE router as one node.

I did not see any documentation describe if this is supported?

0
Posted by John Gill
Answered on July 31, 2020 11:24 am

Hi Richard,

You can extend L3 VPN and L3 EVPN into one another by importing and exporting route-targets under bgp; vrf.
You import vpn route target, then an evpn route target, and export to them both as well.
We have a document to introduce this VPN internetworking.

https://eos.arista.com/eos-4-23-2f/evpn-internetworking-with-ipvpn/

Regards,
John Gill

Post your Answer

You must be logged in to post an answer.