Posted on November 25, 2020 5:06 am
 |  Asked by Ganes Sundaresan
 |  56 views
0
0
Print Friendly, PDF & Email

how would one display EVPN multi-homing DF status for an ES, VLAN?

 

thanks in advance,

-Ganesh S.

0
Answered on November 25, 2020 5:26 am

Hi Ganesh,

Thanks for reaching out.

"show bgp evpn instance" command output would fetch DF status:

Sample Output:

switch#show bgp evpn instance
EVPN instance: VLAN-aware bundle red
Route distinguisher: 10.255.0.0:99
Service interface: VLAN-aware bundle
Local IP address: 10.255.0.0
Encapsulation type: VXLAN
Local ethernet segment:
ESI: 00a2:b97c:4cac:0300:0000
Interface: Ethernet1
Mode: all-active
State: up
ESI label:
ES-Import RT: a2:b9:7c:4c:ac:03
Designated forwarder: 10.255.0.0
Non-Designated forwarder: 10.255.0.1

You can refer to the below TOI for more information regarding EVPN Multihoming :

https://eos.arista.com/eos-4-22-0f/evpn-vxlan-all-active-multihoming/

 

Thanks,

Bhavana.

0
Posted by Rita Martinez
Answered on December 4, 2020 11:26 am

lustrates a simple EVPN topology. Routers PE1 and PE2 are provider edge (PE) routers connected to multihomed customer edge (CE) Router CE1. Router PE3 is connected to CE Router CE2.

For more <a href="https://www.mygiftcardsite.one/">official website</a>

Post your Answer

You must be logged in to post an answer.