Posted on August 14, 2018 5:44 pm
 |  Asked by kian sim lim
 |  381 views
0
0
Print Friendly, PDF & Email

If I disable link-flap monitor and configure link-debounce to 10 sec, what will happen when the link went down? My objective is to have the port remain up if it is not down for more than 10 sec. At the same time, I do not want the errdisable link-flap detect the flapping and errdisable the port.

Sample configuration:

interface Ethernet10
link-debounce time 10000 10000
switchport access vlan 100
no switchport mac address learning
no monitor link-flap
mac address-table static xxxx.xxxx.xxxx vlan 100 interface Ethernet10

NOTE: We disable MAC learning and use static MAC

0
Posted by Alexis Dacquay
Answered on August 17, 2020 6:07 pm

Yes it would work.
It was answered with more details here: https://eos.arista.com/forum/monitor-link-flap/

Post your Answer

You must be logged in to post an answer.