Posted on June 14, 2021 6:22 am
 |  Asked by Jonas Pfefferle
 |  76 views
Tags:
RESOLVED
0
0
Print Friendly, PDF & Email

I use cEOS-lab to test switch configurations before deploying them on the actual hardware. From other forum posts I understand that cEOS-lab does not support NAT. Is this correct? Is there a containerized version which supports NAT or do only the VM based EOS solutions (non-lab) support NAT. It would be nice if this were shown here: https://www.arista.com/en/support/product-documentation/supported-features

Thanks!

0
Posted by Manoaj
Answered on June 14, 2021 6:56 am

Hi Jonas

Yes, your understanding is correct. NAT is not supported on cEOS-lab or vEOS-lab. It is supported only on VM based EOS solutions (non-lab) CloudEOS / vEOS Router as mentioned in the supported features matrix.

Thank you for your valuable feedback.

Regards,

Manoaj Mani

0
Posted by Jonas Pfefferle
Answered on June 14, 2021 7:17 pm

Hi Manoaj

Thank you for the quick answer! Please consider also adding cEOS to the supported features matrix that way there would not be any confusion for others.

Regards,

Jonas

Post your Answer

You must be logged in to post an answer.