Posted on January 30, 2019 5:03 pm
 |  Asked by Samuel Silva
Print Friendly, PDF & Email

Team good afternoon, could you help me with the doubt below.

When an Arista switch boots with no startup-config and ZTP enabled.
In what state are the front-panel interfaces?

All interfaces are shut down or all interfaces are disabled

I installed an edge switch recently but I can not remember the state of the interfaces.

Answered on January 30, 2019 5:18 pm

Hi Samuel.

I would expect to see all interfaces enabled by default, unless it has been changed. Do you have access to the switch CLI via SSH or console?

I have no more, the project has been completed.

(Samuel Silva at January 30, 2019 5:53 pm)
Posted by Tamas Plugor
Answered on January 30, 2019 5:29 pm

all interfaces are enabled and set to routed mode (no switchport) so they can send out DHCP packets

Post your Answer

You must be logged in to post an answer.