Posted on July 8, 2019 3:18 pm
 |  Asked by Davide Ganna
Print Friendly, PDF & Email


I’d like to run a python script and configure an Arista vEOS switch through it (image netmikoSSH.jpg).
However i get the error in errorNetmikoSSH.jpg

What’s the problem?

Thank you.


Posted by Tamas Plugor
Answered on July 8, 2019 5:06 pm

I’ve tried your script and besides the naming of the vlan, which will fail because you can’t have spaces in the description if you don’t use quotes, I don’t see other issues, but I’ve found something that seems to be similar at

You can check this page for more info on send_command and delay_factor (you could try increasing it if it’s too low):

You can also try not doing enable, if you have priv 15, you won't need it

Post your Answer

You must be logged in to post an answer.