Posted on July 10, 2020 1:53 pm
 |  Asked by Taeil Nam
 |  136 views
RESOLVED
0
0
Print Friendly, PDF & Email

Good day,

 

I want to know whether CVP can verify configuration out of sync in real time.

I think CVP can verify configuration out of sync once i check the device’s config manually. (provisioning tab -> right click to device -> view -> config ->back)

Can i check the configuration out of sync automatically in real time on CVP?

0
Posted by Tamas Plugor
Answered on July 10, 2020 1:56 pm

Hi Taeil,

The running-config is streamed real-time which you can see in the Device page, but compliance is run on demand today either when you right click and check compliance on the Network provisioning page (you don't need to go to view config to do this) and you can even do this at container level; or during operations like config pushes, however automatic compliance check will come in an upcoming release towards the end of the year.

Thanks,
Tamas

0
Posted by Taeil Nam
Answered on July 12, 2020 5:47 am

Hi Tamas,

 

I understood your explanation.

I have a question about automatic compliance check function.

When automatic compliance check function comes out later, should i upgrade CVP version?

 

Thank you,

Taeil Nam.

0
Posted by Tamas Plugor
Answered on July 15, 2020 1:28 pm

Hi Taeil,

In general it is recommended upgrading to the latest version as they can contain performance increase, optimisations, bug fixes and new features that you might be interested in (you can also setup a lab environment and test these before going production). The new features and improvements are detailed in the TOIs and release notes. You can also reach out to your local SE team who can advise an demo you the new features when they come out!

Thanks,
Tamas

Post your Answer

You must be logged in to post an answer.