Posted on April 28, 2016 5:49 pm
 |  Asked by Jim Araujo
Print Friendly, PDF & Email

Is there a way to perform a VRF import and export target? Similar to:

ip vrf wanconnection:1
 rd 65000:1
 route-target export 65000:2
 route-target import 65000:99

ip vrf wanconnection:2
 rd 65000:2
 route-target export 65000:1
 route-target import 65000:99

ip vrf shared:1
 rd 65000:99
 route-target export 65000:99
 route-target import 65000:1
 route-target import 65000:2
Marked as spam
Posted by Michael Butash
Answered on May 11, 2016 7:33 pm

I’d also like to know if/when this will/might be supported.  

I’m finding working commonly in established mpls environments it is becoming more common to do multiple route-target import/export to blend traffic. Having the flexibility to do import/export among rt’s is honestly something I just expected if doing mpls, and was rather disappointed to find Arista’s cannot do this.

This is too relevant with my other question about evpn support, where blending fabric vxlan vni/vrf’s might be ideal too.

Whether one *should* blend vrf’s is a whole other topic.


Post your Answer

You must be logged in to post an answer.