Posted on June 26, 2019 9:19 pm
 |  Asked by Davide Ganna
Print Friendly, PDF & Email

Good evening,

I have an ESXi configuration on which I’d like to add two Arista vEOS switches.
In the picture, the configuration is on the right while the switches that I want to add are on the left.
The name of the virtual switches in ESXi are the same as the ones reported in the image.

Below I add the images of my port groups:

I want to ping my Linux Client from my Arista_vEOS_1 and my Arista_vEOS_2. So far I can ping the two vEOS between them and I can ping (which is the interface of the Arista_vEOS_1 connected to the LAN port group). Which is the issue? Why can’t I ping the clients from the vEOS?

Thank you in advance,


Posted by Mark Rayson
Answered on June 27, 2019 9:00 am

Have you enabled ip routing on the vEOS switches? Have you set any routes on the clients to reach the and .2 addresses to go via the address? Maybe post the vEOS configs here too and it’ll be more obvious what’s wrong.

Post your Answer

You must be logged in to post an answer.