• Tag : 5549

 
 

RFC 5549 and IPv4 connection between loopbacks

I have setup a lab environment with two vEOS 4.17.0F-3277845 switches. With this i’m testing RFC 5549 support. Simple setup with a dual-stack loopback interface on both switches and an ipv6 back-2-back connection over Et1. BGP peering session over ipv6 with address families ipv4 and ipv6 active. I get ipv4 routes with ipv6 nexthops in the routing table. So far so good. But when i try to ping from loopback to loopback i get the message “ping: sendmsg: Network is unreachable“. Is there anything i’m missing here? I have followed the instructions at https://eos.arista.com/eos-4-17-0f/rfc-5549-ipv4-unicast-with-ipv6-next-hop-support/ and https://eos.arista.com/eos-4-17-0f/ip-addressless-forwarding-changes-for-bgp-v6-nexthop-for-v4-routes/ . spine1.lab.bit.nl#show ip route 185.62.16.2 B...
Continue reading →

Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: