• Tag : ipv6


TAP agg IPv6 HTTP GET method.

Hi All, Can i implement TAP agg function and filter only http get method on IPv6 traffic ? on this model Arista DCS-7150S-52-CL-F Software image version: 4.18.2F-2GB Regards, Manaschai.

Overlay IPv6 routing over VXLAN

Overlay IPv6 routing over VXLAN Tunnel is simply routing IPv6 packets in and out of VXLAN Tunnels, similar to VXLAN overlay IPv4 routing. Underlay ( Outer IP Header ) in VXLAN still uses IPv4, and common for both overlay IPv4 and IPv6 . Hence VXLAN configuration remains exactly same for both IPv4 and IPv6 overlay routing support. This feature enables IPv6 networks/hosts get connected through VXLAN Tunnels. Following figure illustrates IPv6 routing followed by VXLAN encapsulation to reach a remote host across the VXLAN tunnel.   Following figure illustrates VXLAN decapsulation and routing of an IPv6 packet. Platform compatibility DCS-7050X DCS-7060X DCS7260X DCS-7050X2 DCS-7250X DCS-7304 / DCS-7308 /...
Continue reading →

IPv6 Support for Decap Groups

The document describes an extension of the decap group feature, that allows IPv6 addresses to be configured and used as part of a group. IP-in-IP packets with v6 destination matching a configured decap group IP will be decapsulated and forwarded based on the inner header. That will allow any IP-to-IP packet type to be decapsulated, i.e. v4 in v4, v4 in v6, v6 in v4 and v6 in v6. Platform compatibility DCS-7050X DCS-7500X DCS-7260X DCS-7500R DCS-7500E DCS-7280R DCS-7280E Configuration Configuration is similar to IPv4-only decap group. Additional option of configuring IPv6 address is now available after the “decap-ip” keyword. If...
Continue reading →

Does Arista EOS support EUI-64?

Quick question does Arista EOS support EUI-64 addressing on interfaces? Something like: Router(config-if)# ipv6 address 2001:db8::/64 eui-64  

Do Arista APs and Servers Support IPv6?

Introduction Arista APs and Servers are with IPv6 networks. This article explains the supported and unsupported features. Supported Features Ping and SSH to the Wireless Manager. Wireless Manager access. Sensor SSH uses Sensor’s IPv6 address. Sensor’s IPv6 address are shown on the Wireless Manager , along with their IPv4 addresses. External Server Interfaces: Configuration of external Servers i.e. SMTP Server, Syslog Server, SNMP Server, ArcSight Server can be done using their IPv6 addresses. Server upgrade is supported over both IPv4 and IPv6 networks. All 802.11n/ac/ax platforms except C-10, C-50 and legacy SS-200, support IPv6.  To review the IPv6 settings, use...
Continue reading →

IPv6 layer 2 security

hi, can it be that there are no IPv6 layer 2 security features like RA Guard (described in RFC 7113) or dhcpv6 guard (described in RFC 7610) available in current eos versions? I can’t find anything about it in the documentation. How do you handle this?


Get every new post on this blog delivered to your Inbox.

Join other followers: