- Written by Seng Leung
- Posted on February 16, 2022
- Updated on November 16, 2023
- 6046 Views
AAA accounting records can be enabled for OpenConfig gNMI/gNOI RPCs. Accounting records can be logged to the TACACS+ server, RADIUS server, or to syslog.
- Written by Christopher Neilson
- Posted on June 29, 2023
- Updated on July 3, 2023
- 2942 Views
This feature adds support for gNMI access to the last-configuration-timestamp YANG node in the OpenConfig/Octa agent. When a gNMI set is completed, the last-configuration-timestamp is updated. When the configuration is changed via CLI or some other mechanism, the change eventually propagates to the OpenConfig/Octa agent, which will update the last-configuration-timestamp.
- Written by Seng Leung
- Posted on May 9, 2022
- Updated on June 2, 2022
- 5185 Views
When OpenConfig is enabled, the entire YANG tree is exposed to the client. This allows a client to have read and write access to all parts of the YANG tree. In some cases, it would be preferable to block portions of the YANG tree so that specific part of the tree cannot be modified or read by the client.
- Written by Abhiram Kalluru
- Posted on August 31, 2023
- Updated on September 12, 2023
- 2201 Views
This feature allows exporting IP-in-IP tunnel counters through the OpenConfig AFT YANG models.This exporting IP-in-IP counters feature is supported on all platforms, however counting the IP-in-IP tunnel packets is supported only on DCS-7500R3, DCS-7280R3 and DCS-7800R3 series.
- Written by Seng Leung
- Posted on October 27, 2021
- Updated on October 27, 2021
- 5952 Views
Traditionally, the OpenConfig gNMI service is based on a dial in model. A client sends a request to the gNMI server and
- Written by Seng Leung
- Posted on August 27, 2019
- Updated on August 27, 2019
- 5201 Views
gNOI (gRPC Network Operations Interface) defines a set of gRPC based microservices for executing operational
- Written by Seng Leung
- Posted on August 27, 2019
- Updated on August 27, 2019
- 4841 Views
gNOI (gRPC Network Operations Interface) defines a set of gRPC based microservices for executing operational
- Written by Shyam Kota
- Posted on April 9, 2021
- Updated on November 2, 2021
- 5589 Views
gNOI (gRPC Network Operations Interface) defines a set of gRPC based microservices for executing operational
- Written by Kiran Kumar Immidi
- Posted on August 25, 2020
- Updated on August 25, 2020
- 5293 Views
The candidate configuration feature implements support for a candidate data store as specified in RFC6241.
- Written by Allyn Wade
- Posted on August 27, 2019
- Updated on May 8, 2020
- 6899 Views
Octa is a process which combines OpenConfig and certain TerminAttr functionality, primarily with the intent of
- Written by Pandurangan R S
- Posted on October 27, 2023
- Updated on October 31, 2023
- 1293 Views
This feature adds support to configure the following QoS OpenConfig models via gNMI QoS Classifiers for classification of incoming traffic. QoS Scheduler Policies for describing scheduling strategies on a port.
- Written by Seng Leung
- Posted on March 8, 2024
- Updated on March 8, 2024
- 349 Views
For Macro Segmentation Service Group (MSS-G) configurations, if only the segmentation model for OpenConfig is required, then it is possible to disable all other models for OpenConfig. This feature allows access to only the /segmentation path in the OpenConfig YANG tree. This significantly reduces the OpenConfig agent’s memory usage.
- Written by Ronan Mac Fhlannchadha
- Posted on February 9, 2023
- Updated on February 22, 2023
- 3595 Views
This feature provides support for SPIFFE-ID in OpenConfig. The SPIFFE-ID will take precedence over any metadata usernames or common name username found. This username will be used for all AAA operations.
- Written by Ruoyi Wang
- Posted on August 31, 2023
- Updated on February 16, 2024
- 1996 Views
This feature allows exporting the route count by protocol, i.e., a summary of routes, in the FIB (Forwarding Information Base) through the OpenConfig AFT YANG model.
- Written by Brian Neville
- Posted on November 8, 2023
- Updated on March 15, 2024
- 1515 Views
gNSI (gRPC Network Security Interface) defines a set of gRPC-based microservices for executing security-related operations on network devices.
- Written by Aparna Karanjkar
- Posted on January 18, 2019
- Updated on January 23, 2019
- 5265 Views
4.21.3F release supports reading and streaming various OpenConfig configuration and state models over gNMI (gRPC
- Written by Aparna Karanjkar
- Posted on March 13, 2020
- Updated on March 13, 2020
- 5538 Views
4.23.2F release supports reading and streaming various OpenConfig configuration and state models over gNMI (gRPC
- Written by Aparna Karanjkar
- Posted on June 17, 2019
- Updated on June 17, 2019
- 4432 Views
4.22.0F release supports reading and streaming various OpenConfig configuration and state models over gNMI (gRPC
- Written by Michael Sparacio
- Posted on August 16, 2018
- Updated on June 20, 2019
- 5250 Views
These are the release notes and configuration guide for the OpenConfig feature in the 4.21.0F release.
- Written by Romanos Skiadas
- Posted on April 22, 2021
- Updated on April 22, 2021
- 4665 Views
This feature adds support for streaming the output of the following show command in Octa:. The
- Written by Abhiram Kalluru
- Posted on March 3, 2023
- Updated on March 20, 2023
- 2717 Views
This feature introduces a flag to indicate to a gNMI client that the FIB (forwarding information base) or IPv4/IPv6 unicast AFT (abstract forwarding table) have converged and the snapshot is consistent with the device.
- Written by Matthew Carrington-Fair
- Posted on March 3, 2023
- Updated on November 7, 2023
- 2462 Views
This feature allows IP FIB (Forwarding Information Base) export through the OpenConfig AFT YANG models.
- Written by Abhiram Kalluru
- Posted on June 16, 2022
- Updated on June 17, 2022
- 3347 Views
This feature allows LFIB (Label Forwarding Information Base) & associated counters export through OpenConfig mpls AFT (Abstract Forwarding Tree) YANG model.
- Written by Abhiram Kalluru
- Posted on September 11, 2023
- Updated on November 7, 2023
- 1374 Views
This feature allows FDB export through the OpenConfig AFT YANG models. The streaming behavior of mac addresses are Entries associated with SVI or L3 port have an associated VRF name. The VRF name is used to specify which network instance the FDB entry belongs to.