• Tag : Spine

 
 

Layer 3 Leaf-Spine – Rendezvous Point Placement?

Hello everybody, I have configured a leaf-spine architecture (4 leafs, 2 spines), see attached image. L3 routing is enabled on leafs and spines and eBGP is used between them. To enable VXLAN (from VMware Hosts), multicast needs to be configured. So far, ip multicast-routing and ip pim sparse-mode is set. Where do I configure the rendezvous point (RP) and which method would I use? I would prefer to place it on the spine switches using anycast-rp, but one spine switches does not reach the other spine switch (as the route to spine1 is not announced to spine2 by the leafs...
Continue reading →

Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: