• Tag : vxlan configuration

 
 

vxlan configuration

Hi there I made vEOS lab for bgp evpn switchs and i got some error   when i made vxlan interface configuration .. i add static vlan vni mapping on that interface like this ! interface Vxlan1 vxlan source-interface Loopback1 vxlan controller-client import vlan none vxlan udp-port 4789 vxlan vlan 1000-2000 vni 1000-2000 ! it works..   then i want to extend of range for more vlan useage i changed like this ! interface Vxlan1 vxlan source-interface Loopback1 vxlan controller-client import vlan none vxlan udp-port 4789 vxlan vlan 11-3200 vni 11-3200 ! Then..  Ethernet interface wont up state it told notconnect...
Continue reading →

Spine-Leaf BGP EVPN Best Practice

Hello I’m seeking for a white paper\best practice document that can cover deploying a topology of spine-leaf data center. The points i’m seeking clarifications are 1. underlay L3 connectivity – is IGP required to be configured between spine and leafs. 2. is multicast a must between spine and leaf for control plan operation? (forwarding BUM packets?) 3. with vxlan, are there any problems using mlags? how can i advertise a certain MAC address is available from two different VTEPs and encapsulate into vxlan from both connections? 4. in terms of configuration, how can i deploy such a scenario? 5. unconventional as it...
Continue reading →

vxlan problems

I am having an issue with setting up a vxlan configuration. Is there something I am missing in the below setup – I am trying to get a CPE connection across a physical network with vxlan?  I can ping into switch 1 (custA switch) from the CPE, but I have nothing saying vxlan is working between the two switches. I have followed the config guide but I cannot get any vxlan address table entries to show vlan to vxlan mapping is working. device-1 – CPE device with layer-2 vlan 100 with ip address 20.20.20.2/24> switch-1 config: vlan 100 ! interface...
Continue reading →

Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: