DISCLAIMER: While this platform is not officially monitored by Arista Networks, Arista affiliated persons, including Arista employees, will periodically contribute. Arista affiliated persons are not authorized Arista spokespeople and contributions posted to this forum by Arista Networks employees, partners, and customers do not necessarily represent the position or view of Arista Networks.

This forum is NOT to be used for official Arista Networks product technical support. For technical support of any Arista product, please contact Technical Support at support@arista.com.

Views
Question
60
views
asked 1 week ago by
I have a need to send arista switch syslog info to at least 2 different syslog servers.  Is this possible?  I have not been able to find anything definitive in any online documentation.   thanks,
60
views
asked 1 week ago by
Hello, I am developing a parser for some portion of Arista config files and I wanted to ask about a snippet of config I have seen.  My question revolves around the bang '!' character and how it and tabs end context for config statements. The 'router...
19
views
asked 2 weeks ago by
Hi. I would like to develop some script on Arista 7150 Switch but I am not good at python(2.7 installed ) for an optimization issue. Could someone help me with this issue? thank you in advance Bye.  
116
views
asked 3 weeks ago by
Tags:
Is it possible to obtain each VRF routing table via SNMP on Arista?  mplsL3VpnVrfRteInetCidrDest does not exist(?). thank you
50
views
asked 3 weeks ago by
Is there any cheat sheet that we can follow to setup an email alerting for any environmental issues (FAN/PSU etc). I was reading about event-handler but it only focuses on interfaces and no support for system and environmental issues. For example, tr...
75
views
asked 1 month ago by
Hello All, We are trying to integrate Arista Switches with OpenStack using Ml2 Plugins. Details of the setup as below  Setup Details: Base OS: CentOS Linux release 7.3.1611 (Core) OpenStack Version: Mitaka (13.1.2-1.el7) Control +Network Node : 172...
212
views
asked 1 month ago by
Tags:
Does anyone have an updated count of VRFs supported per-platform? Also, is the vrf limit a hard number, or is a higher count allowed with potential performance degradation? The materials at the link below seem to be out of date, and I haven't been ab...
83
views
asked 1 month ago by
Hi, I notice that my 7150 switch is dropping packets when I configure load balancing, and it gets progressively worse as the switch is used for a period of time. The extent of packet drop is lowest when the switch is restarted, but restarting the swi...
74
views
asked 1 month ago by
Such as SW1interface Po10.100 encapsulation dot1q vlan 100 no switchport ip add 10.0.0.2/24 ip virtual-router address 10.0.0.1!ip virtual-router mac-address 00:1c:73:00:00:99 SW2interface Po10.100 encapsulation dot1q vlan 100 no switchport ip add 10....
86
views
asked 1 month ago by
I know with arista all VRF's have to have the same AS number. lets say I use as 65000 to ebgp peer with someone. If I set up aanother VRF and want to ibgp peer with someone using as 65005, with the "local as" function where you impersonate an AS numb...
55
views
asked 1 month ago by
Hi, I've seen from other websites that the Arista switches have very low delays for this - but are there any figures available on how long this typically takes? Is it dependent on the number of Groups in use? Thanks, Richard
74
views
asked 1 month ago by
Hi All, I want to test Arista Netwotk Telemetry for Splunk 1.4. I've dowloaded the arista-networks-telemetry-for-splunk_14.tgz file from splunk website. And i want to install it with Splunk Light.  Could someone give me the guidance or step by step ...
33
views
asked 1 month ago by
Was doing some scripting and Configlet builders and found that in the CVX it appear arista is releasing new features very soon :D cli-relay and bug-alert from cvx Software image : 14.17.3F will try to see is it working :D
82
views
asked 1 month ago by
 Hello? We are using Arista switches' hardware VTEP and VMware vSphere NSX to integrate with physical network. I think NSX controllers are communicating with HSC via OVSDB management protocol and it must be delivering the information of VxLAN(VTEP,...
138
views
asked 1 month ago by
We have two Arista switches: 7050T running version 4.10.6 7050SX running version 4.13.8M We are trying to get counters of the outgoing discarded packets per interface, ifOutDiscards using SNMP, and see switch 1 (the old version) discarding packets (i...
88
views
asked 1 month ago by
Hi   I have 3 x 2 unit  MLAG setup.  on 2 of my mlag's I have some Equal Logic storage.   I was wondering if there was any best practise or white paper on whats the next setup for my arista switches (DCS-7050SX-64-F), DCB is the requireme...
55
views
asked 1 month ago by
Merely out of curiosity!
56
views
asked 1 month ago by
ma1 is always binding to the first  bridge in my KVM config. I would like it to bind to the openvswitch network I have created. If i configure only the openvwitch network and no bridges, ma1 binds to the openvswitch and is fully functional. How do I...
96
views
asked 1 month ago by
Hi, Just wondering about several releases in EOS --> Other releases category. I am seeing EOS-4.17.2FX-OpenStack, EOS-4.17.1FX-VRRP6LL and EOS-4.17.1.1FX-MDP releases.  I understand X releases are for specific purpose and not be used in genera...
241
views
asked 1 month ago by
♥ 1
Hello  In Arista Networks EOS shell, I  see statistics on Interface vlan. I want to see this statictics in the CLI. Also, I want to monitor interface vlans in CACTI! ifconfig vlan2589 vlan2589 Link encap:Ethernet HWaddr 00:1C:73:FE:72:BA inet addr...
136
views
asked 2 months ago by
Hello, When i doing command that have a lot of output like "show run",  how can i stop the output instead of waiting to all the output to come over?   In other vendors, you can press ctrl+c or ctrl+break to stop the all output.
77
views
asked 2 months ago by
Hello, Is there a better way than compiling GIT client source if I want using it on CVP ? Do you provide a RPM / YUM package for that purpose ? I'd like to have CVP comiting code and/or getting them from our GIT repository. Thx in advance.  
111
views
asked 2 months ago by
I have been struggling to get arista auth/autorizaiton on MS NPS and wasnt successful. i am using the following VSAs: ATTRIBUTE / Arista-AVPair / 1 / stringATTRIBUTE / Arista-User-Priv-Level / 2 / integerATTRIBUTE / Arista-User-Role / 3 / stringATTRI...
164
views
asked 2 months ago by
Hi,  I have installed cloud vision portal (2016-1.2.1) with 10 vEOS (4.16.6M) switches in a test environment.  How can I gather more inventory information? Like port count, port status etc.  How can I gather switch performance related data? Or CVP...
158
views
asked 2 months ago by
We have two transit connections connected to our Arista switch and a PBR routing to send outgoing packets based on the source IP. Now we want to connect to an exchange and get all prefixes that are being advertised from the exchange into our routing ...
1 2 3 18

Ask a Question

You must be logged in to post a question.

Follow

Get every new post on this blog delivered to your Inbox.

Join other followers: