Posted on October 5, 2021 1:54 pm
 |  Asked by Scott Jamieson
 |  41 views
0
0
Print Friendly, PDF & Email

Arista 7060-SX2 will not boot.  On the serial i/f I see the following:

coreboot-4.0-Abort3-norcal16-6.1.7-13531819 Thu Sep 19 08:16:40 PDT 2019 starting.

BSP Family Mode1: 00730f01

cpu_init_datectedx=00000000

a bunch of EnentLogs

agesawrapper_amdinitpost() returned AGESA_FATAL

agesawrapper_amdinitenv() entry

Fch OEM config in INIT ENV Done

agesawrapper_amdinitenv() returned AGESA_SUCCESS

 

The switch is hung at this point.

 

Any ideas on how to proceed?

Thanks in advance.

0
Answered on October 5, 2021 3:21 pm

Hi Scott.

I understand that you cannot run any commands via console, correct? If this is the case, this could be a potential hardware issue, but I would suggest contacting support@arista.com take a further look, and confirm the next steps.

0
Posted by Joe
Answered on October 5, 2021 3:23 pm

Hello Scott,

 

This device looks to be faulty, please open up a TAC case.  This looks highly likely to be an RMA situation.

 

--

Joe Dewberry

Arista TAC

Post your Answer

You must be logged in to post an answer.