Posted on March 11, 2019 8:12 pm
 |  Asked by Illia Melnykov
 |  251 views
0
0
Print Friendly, PDF & Email

Hello, all!

I have a case, where I need to spread 100G across 10 x 10G ports separated by TCP sessions.
Is Arista can help with that in some deployment scenarios or schemes?

Thank you!

0
Posted by Alexis Dacquay
Answered on August 14, 2020 9:14 pm

Hi Illia,
Yes.
Load-balancing can be done by L2/L3/L4 hashing, meaning the TCP sessions will be distributed across.
If you need both directions of a same conversation to go onto a same physical interface, for example because it might need to be inspected by an IDS or other analyser, then you should use the hashing method called "Symmetric". Not all the platforms support this though.

What is your switch model, or the one you consider?

Regards,
Alexis

Post your Answer

You must be logged in to post an answer.