Posted on September 26, 2016 2:27 pm
 |  Asked by Chen Ashkenazi
 |  719 views
RESOLVED
0
0
Print Friendly, PDF & Email

Hello everyone,

I got the vEOS running on Virtualbox integrated with GNS3, so far everything running fine.

Im trying to find out if the configuration session feature is not available on the vEOS or maybe im missing somthing.

I’ve tried to issue the command : configure session from enable mode but it looks like there is no such command.

Did anyone else encountered the issue?

 

Best Regards,

Chen.

1
Posted by Alexis Dacquay
Answered on September 26, 2016 8:02 pm

Hi Chen,

 

I use vEOS-lab on Virtualbox via GNS3 and config session works fine for me.

Verify that you are running a version that had config-session implemented, not an old version of vEOS-lab.

 

See below:

 

leaf1#configure session TEST
leaf1(config-s-TEST)#hostname JustATest
leaf1(config-s-TEST)#abort
leaf1#sh ver
Arista vEOS
Hardware version:
Serial number:
System MAC address: 0800.2759.6018

Software image version: 4.17.1.1F
Architecture: i386
Internal build version: 4.17.1.1F-3512479.41711F
Internal build ID: 9fe014fa-0747-4272-8df4-d916df2d37c5

Uptime: 1 hour and 52 minutes
Total memory: 1893464 kB
Free memory: 878736 kB

leaf1#

Post your Answer

You must be logged in to post an answer.