Posted on November 8, 2019 9:26 am
 |  Asked by Niklas Hoglund
 |  57 views
0
0
Print Friendly, PDF & Email

Hi,

My CVP reports: LANZ streaming is disabled on this device.

I’ve tried the following commands om my 7050X3:
!
daemon TerminAttr
exec /usr/bin/TerminAttr -ingestgrpcurl=:9910 -cvcompression=gzip -ingestauth=key, -smashexcludes=ale,flexCounter,hardware,kni,pulse,strata -ingestexclude=/Sysdb/cell/1/agent,/Sysdb/cell/2/agent -ingestvrf=default -taillogs
no shutdown
!
queue-monitor length
!
queue-monitor length log 2
!
queue-monitor streaming
no shutdown
!
interface Ethernet41
queue-monitor length thresholds 1000 550
!

What more do I need to do to startLANZ streming to CVP?

BR, Niklas

0
Posted by Tamas Plugor
Answered on November 8, 2019 9:38 am

Hi Niklas,

That looks good! after enabling queue-monitor streaming you should see the LANZ graphs.
I assume you are on this URL: https://CVP_IP/cv/devices/congestion/deviceSerialNumber/Ethernet41

Please make sure in the URL you don't have any time related parameters like active or start, e.g.
?active=1573187870863&fromOffset=3595543&toOffset=3595543

otherwise it'll show you the state in the past, so if at that unix time LANZ was disabled, the UI will show you that. You can either remove the parameters, or click on the Live button on the bottom right.

HTH,
Tamas

Post your Answer

You must be logged in to post an answer.