Posted on November 11, 2021 11:10 am
 |  Asked by Radim Roska
 |  70 views
RESOLVED
0
0
Print Friendly, PDF & Email

Hello,

is there some command that shows advertised evpn routes for specific peers?

I would expect syntax such as this:

show bgp evpn neighbors 100.0.0.2 advertised-routes

I tried to search documentation, google..no luck :).

Thanks
Radim

0
Posted by Sachin M Menon
Answered on November 11, 2021 11:17 am

Hi Radim,

 

We should be able to advertised to a specific EVPN peer with "show bgp neighbors <neigh_IP> evpn advertised-routes" command. Below is a sample output:

Switch#show bgp neighbors 1.1.1.1 evpn advertised-routes
BGP routing table information for VRF default
Router identifier 2.2.2.2, local AS number 23
Route status codes: s - suppressed, * - valid, > - active, E - ECMP head, e - ECMP
S - Stale, c - Contributing to ECMP, b - backup, q - Queued for advertisement
% - Pending BGP convergence
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop

Network Next Hop Metric LocPref Weight Path
* > RD: 2.2.2.2:100 imet 23.23.23.20
23.23.23.23 - 100 0 23 i
* > RD: 2.2.2.2:100 imet 23.23.23.23
23.23.23.23 - 100 0 23 i

 

Thanks,

Sachin

0
Posted by Radim Roska
Answered on November 11, 2021 11:46 pm

yes, thanks..that was it...

i found it eventually as well...but i was not able to delete the forum post since it was moderated :).

ANyway - maybe it will help somebody in the future :)

Thanks
Radim

Post your Answer

You must be logged in to post an answer.