Posted on April 22, 2019 4:52 pm
 |  Asked by Warren Granada
 |  148 views
0
0
Print Friendly, PDF & Email

I have a quick question, I am assuming no but figured would as anyways. I know on Cisco layer 3 switches you cannot NAT I am assuming that is the same on Arista switches?

0
Posted by Shreyas Ruwala
Answered on April 22, 2019 5:47 pm

Hi Warren,

1. Arista 7150 series switches do support NAT feature and widely used in the field
2. Here are a few links to go over for implementation as per your network requirements.
3. As always we can have our expert system engineer reach out to you for further discussion

NAT TOI’s:
1.7150S NAT – Practical Guide – Source NAT – Static:
https://eos.arista.com/7150s-nat-practical-guide-source-nat-static/
2.7150S NAT – Practical Guide – Source NAT – Dynamic:
https://eos.arista.com/7150s-nat-practical-guide-source-nat-dynamic/

Hope this helps

Sincerely,
Shreyas Ruwala
Technical Solutions Engineer – Arista Networks
Direct Support line: +1 919 312 9613 [10:00 AM to 16:00 EST] (GMT-4)
International Support line: +1 408 547 5502 or +44 207 023 9352
Toll-free Support line: +1 866 476 0000 (US), +44 808 234 0722 (UK)
Please call support if immediate assistance is required.
If you have feedback or concerns at any point during the course of this case, please contact tac-feedback@arista.com

0
Answered on April 23, 2019 5:24 am

Hi Warren.

NAT is a supported feature on EOS:

https://www.arista.com/en/um-eos/eos-section-27-8-ip-nat

You can check which platforms currently support this feature on our website:

https://www.arista.com/en/support/product-documentation/supported-features

Sorry for the delay I have a

Hardware version: 03.02
Serial number: JSH10150041
System MAC address: 001c.7304.7ac6

Software image version: 4.12.7.1

so it looks like I cannot NAT but appreciate the response

Thank you all!!!!!

(Warren Granada at July 23, 2019 3:11 pm)

Post your Answer

You must be logged in to post an answer.