Posted on April 4, 2019 7:17 pm
 |  Asked by Eli Crane
Print Friendly, PDF & Email

Due to this article

LDP Pseudowire

looks like that not possible to change pw class.

Is any way to repeat Comware config for 7280R2?

[hpsw]pw-class type5
[hpsw-pw-type5]trans-mode ethernet
[hpsw]int Ten-GigabitEthernet 1/0/51
[hpsw-Ten-GigabitEthernet1/0/51]service-instance 200
[hpsw-Ten-GigabitEthernet1/0/51-srv200]encapsulation s-vid 200
[hpsw-Ten-GigabitEthernet1/0/51-srv200]xconnect peer pw-id 200 pw-class type5

Posted by Eli Crane
Answered on April 8, 2019 11:29 am

To be clear – I need to interconnect ethernet interface (bpdu’s should be transparently transmitted in pw) with pw on other side, terminated as 802.1q tagged.

Post your Answer

You must be logged in to post an answer.