Posted on January 29, 2019 6:50 pm
 |  Asked by Matthias Riegler
 |  98 views
0
0
Print Friendly, PDF & Email

Hi there,

I am wondering if sFlow is supported for a Port Channel Interface or just for “physical” Ethernet interfaces.
Switch platform is a 7050SX-64.

Cheers,
Matthias

0
Posted by Shreyas Ruwala
Answered on January 29, 2019 7:16 pm

Hi Matthias,

7050SX-64 supports sflow for port-channel interfaces.
However please note the sflow support for sub-interfaces is under developmemt phase.

Switch(config)#show sflow interfaces
Default sFlow configuration for an interface: Disable
sFlow Interface (s):
——————–
Ethernet20/1 – running(Counter)
Ethernet21/1 – running(Counter)
{{Omitted for Brevity}}
Port-Channel10 – running(Flow,Counter)
Port-Channel11 – running(Flow,Counter)
Port-Channel12 – running(Flow,Counter)
Port-Channel13 – running(Flow,Counter)

Thanks

0
Posted by Matthias Riegler
Answered on February 2, 2019 8:06 pm

Thank you very much! I’ll give this a shot!

Post your Answer

You must be logged in to post an answer.